Skip to product information
1 of 3

Siemens

1K0907554F Haldex control unit Refurbished

1K0907554F Haldex control unit Refurbished

Regular price €389,90 EUR
Regular price Sale price €389,90 EUR
Sale Sold out
Quantity
  • Warranty
  • Online Support
  • Express Shipping
1K0907554F Haldex Control Unit Gen 2 | Refurbished OEM

Refurbished Haldex Control Unit 1K0907554F

Part Number: 1K0907554F

OEM original rear differential / Gen 2 Haldex AWD control module for Volkswagen Group vehicles

System Type Haldex AWD 2nd Generation
Condition Refurbished Fully Functional
Manufacturer Siemens
Supplier Reference HAP511 / 5WP22232-02
Software / Hardware SW 0115 / HW H05
Warranty 12 Months
Tested & Verified Working Unit Each module is professionally refurbished, sealed with new silicone and fully tested before dispatch. It is supplied as a dependable OEM replacement for a faulty original Haldex controller and helps restore stable AWD communication and rear axle engagement.

OEM Part Numbers

OEM Reference Numbers:

1K0907554F  •  1K0 907 554 F  •  HAP511  •  5WP22232-02  •  107718-02  •  SW 0115  •  HW H05

Compatible ECU Numbers:

1K0907554  •  1K0907554B  •  1K0907554C  •  1K0907554F

Always Verify Your Part Number Before placing an order, check the OEM number printed directly on your existing Haldex control unit and confirm it matches the references listed above. If you are unsure about compatibility, contact us and we will help verify fitment.

Technical Specifications

System Type:
Haldex AWD 2nd Generation
Component:
Rear Differential Control Unit
Application:
Volkswagen Group AWD / 4x4 vehicles with Gen 2 Haldex
Manufacturer:
Siemens
Supplier Ref:
HAP511 / 5WP22232-02
VW / Siemens Ref:
107718-02
Software Version:
0115
Hardware Version:
H05
Part Condition:
Refurbished Tested & Verified Working

Product Description

This is a genuine refurbished OEM Haldex control unit with part number 1K0907554F. It is a key electronic component of the second-generation Haldex all-wheel-drive system and is responsible for controlling the hydraulic operation of the Haldex clutch and rear axle engagement when traction is required.

What This Control Module Does

  • Controls the Haldex coupling for rear-wheel engagement on demand
  • Communicates with ABS, ESP and drivetrain modules
  • Monitors AWD system operation and stores diagnostic trouble codes
  • Controls pump activation and clutch pressure strategy
  • Supports stable AWD function in normal driving and low-traction conditions
Direct OEM Replacement This module is intended as an OEM replacement for the original control unit. Coding or adaptation may be required after installation depending on the vehicle configuration, and online support is available if needed.

Vehicle Compatibility

The 1K0907554F is compatible with selected Volkswagen Group vehicles equipped with Gen 2 Haldex AWD. Always verify the exact part number on your existing module before ordering.

Volkswagen

  • Volkswagen Golf
  • Volkswagen Golf R32
  • Volkswagen Passat

Audi

  • Audi A3
  • Audi S3
  • Audi TT

Škoda

  • Škoda Octavia
  • Škoda Superb
  • Škoda Fabia

SEAT

  • SEAT Altea
Not Sure About Compatibility? If you are unsure whether this control unit fits your vehicle, send us your VIN number or the OEM number from your existing module. We will help confirm compatibility before you order.

Common Symptoms of a Faulty Module

A defective Haldex control unit commonly causes the following issues:

  • Loss of AWD / 4x4 function or no rear axle engagement
  • 00003 Control module defective
  • 00448 Haldex clutch pump (V181) faulty
  • 01324 All Wheel Drive Control Module (J492) no communication
  • 02248 Valve for controlling clutch operating angle (N373) defective
  • 16347 Control module defective / internal fault
  • ESP / ABS warning lamps illuminated on dashboard
  • No communication with AWD module during diagnostics
  • Rear-wheel drive not engaging or AWD not working at all
Diagnostic Tip If this module is being replaced, it is recommended to inspect the Haldex control valve N373, pump and connector condition. A proper diagnostic scan should be carried out before and after installation.

Installation

Installation Steps

  • Disconnect the battery and safely access the rear differential Haldex module
  • Remove the old control unit and inspect connectors for corrosion or moisture
  • Fit the replacement ECU carefully and reconnect all plugs securely
  • Clear fault codes and check AWD module communication with suitable diagnostic equipment
  • Carry out any required coding or adaptation if your vehicle requests it
  • Perform a test drive and confirm correct AWD engagement
Online Technical Support Included If the control unit requires coding assistance after installation, our technical team is available to help. Reach us using the contact button below or at [email protected]

Why Haldex Control Units Fail

1. Water Ingress & Sealing Failure

Moisture and damaged sealing can affect the control unit housing and internal electronics, leading to corrosion, unstable communication and complete AWD malfunction.

2. Valve or Pump Related Faults

Failure of the Haldex control valve N373 or pump can overload the system and trigger repeated module-related diagnostic errors.

3. Internal Electronic Failure

Internal circuit faults, controller wear and communication failure can cause intermittent operation or complete loss of rear differential control.

4. Wiring or Power Supply Problems

Damaged wiring, poor terminal contact or unstable power supply can interrupt module operation and create misleading communication or actuator fault codes.

Warranty

12-Month Warranty: This refurbished Haldex control unit has been tested for correct operation and is supplied with a 12-month warranty under normal operating conditions.

Warranty Coverage Includes:

  • Internal control unit malfunction
  • Communication failures caused by the module itself
  • Faults related to controller operation under normal use

Warranty Exclusions:

  • Incorrect installation or incompatible vehicle fitment
  • External wiring, pump or valve faults
  • Physical damage, water damage after installation or mishandling

Questions or Need Help?

Our technical team is ready to assist with compatibility checks, installation guidance and coding support.

Contact Us

Important Purchase Information

  • Please verify this part fits your specific vehicle before placing an order
  • Photos are for illustrative purposes only and the supplied unit may differ in appearance
  • Worldwide shipping is available
  • If your country is not listed at checkout, contact us and the order can be processed manually
  • Replacing Haldex oil and checking the N373 valve is recommended when fitting a replacement ECU
  • Coding or adaptation may be required after installation and online support is included
© 2026 Cars-ECU. Product page prepared in the updated BMW-style layout.
View full details