Transmission Type DSG 7 DQ200
ConditionNew
Component Mechatronics Repair Kit
System 0AM / 0CW
Clutch Type Dry Clutch
Warranty 24 Months
Original Factory Repair Solution This service kit0AM398025 is designed for DQ200 7-speed DSG mechatronics and is used to restore hydraulic sealing, pressure stability and proper operation of the mechatronics assembly.
OEM Part Numbers
Main OEM Number:
0AM398025
Related OEM References:
0AM325066 • 0AM325587F • 0AM325433E • 0AM325467J • 0AM325483G • 0AM927377
Compatible Mechatronics Codes:
0AM927769D • 0AM927769K • 0AM927769G • 0AM927769F • 0AM927769E • 0AM325025D • 0AM325025H • 0AM325025J • 0AM325065N • 0AM325065L • 0AM325065S • 0AM325065T • 0AM325065AB
Always Verify Your Original Part Before ordering, confirm the exact mechatronics version and repair kit compatibility with your original DQ200 unit. The 0AM398025 kit is used across multiple DQ200 mechatronics versions, but the correct fit must always be verified by OEM number and vehicle application.
Technical Specifications
Transmission Type:
DSG 7-Speed DQ200
Component:
Mechatronics Repair Kit
Condition:
New aftermarket
Clutch Type:
Dry Dual Clutch
Application:
VW Audi Skoda Seat DQ200 mechatronics
Main Part Number:
0AM398025
Included:
Repair kit for mechatronics hydraulic restoration
Warranty Period:
24 Months
Installation:
Professional installation recommended
Product Description
This original 0AM398025 mechatronics repair kit is designed for the DQ200 DSG 7-speed dry clutch transmission. It is intended to restore the hydraulic side of the mechatronics assembly, improve sealing, and help solve pressure-related issues caused by wear or leakage in the original unit.
What This Repair Kit Does
- Restores hydraulic sealing in the DQ200 mechatronics unit
- Helps maintain correct pressure inside the DSG control system
- Supports proper operation of the mechatronics hydraulic body
- Provides a factory repair solution for wear-related hydraulic faults
- Suitable for selected VW Group DSG 7 DQ200 applications
Service Note This kit is intended for repair and overhaul work on DQ200 mechatronics systems. Depending on the fault condition, additional parts or adaptation procedures may be required after installation.
Vehicle Compatibility
The 0AM398025 repair kit is suitable for selected vehicles equipped with DSG 7 DQ200 mechatronics, including 0AM / 0CW transmission families. Public references list broad VW Group coverage across Volkswagen, Audi, Škoda and SEAT models.
Suitable for Selected Vehicle Models
- Volkswagen Golf
- Volkswagen Jetta
- Volkswagen Passat
- Volkswagen Polo
- Volkswagen Touran
- Volkswagen Tiguan
- Volkswagen Caddy
- Audi A1
- Audi A3
- Audi Q3
- Škoda Octavia
- Škoda Superb
- Škoda Fabia
- Škoda Rapid
- SEAT Leon
- SEAT Ibiza
- SEAT Altea
- SEAT Toledo
Not Sure About Compatibility? If you are unsure whether this repair kit matches your mechatronics version, send us your VIN number or the OEM number from your original unit. We will help verify compatibility before you order.
Common Fault Codes & Symptoms
DQ200 mechatronics repair kits are commonly used to solve hydraulic pressure problems, leakage and control issues that trigger gearbox warning messages or emergency mode. Public references connect the DQ200 system with common pressure-related faults such as P17BF, P189C and P0841.
-
P17BF Hydraulic pump or pressure related fault
-
P189C Insufficient pressure build-up in the mechatronics system
-
P0841 Transmission pressure sensor range or performance issue
-
P1895 Pressure loss or reduced function fault
- Gearbox warning light on dashboard
- Loss of drive or reduced transmission function
- Delayed or harsh shifting behaviour
- Emergency mode or neutral engagement problems
Diagnostic Tip Pressure loss, leakage and worn seals are typical reasons for DQ200 mechatronics repair kit replacement. Correct diagnosis is important before repair so the right parts are replaced.
Installation & Service Notes
Recommended Steps
- Confirm the exact DQ200 mechatronics version before repair
- Inspect the hydraulic body for wear, leakage and internal damage
- Replace all required seals and components from the kit
- Follow the correct mechatronics assembly procedure
- Check for related pressure or accumulator issues before final assembly
- Perform adaptation and fault clearing after installation
Important Installation Note A repair kit restores worn hydraulic components, but the full mechatronics system must still be assembled and calibrated correctly. Professional installation is strongly recommended.
Why Mechatronics Repair Matters
1. Restores Sealing
A quality repair kit helps restore the hydraulic sealing needed for correct mechatronics operation.
2. Supports Pressure Stability
Stable hydraulic pressure is essential for proper DSG7 control and clutch actuation.
3. Prevents Repeat Faults
Replacing worn sealing and hydraulic parts helps reduce recurring pressure-related gearbox faults.
4. Extends Unit Service Life
Using the correct original repair kit can extend the service life of the DQ200 mechatronics system.
Quality Assurance & Warranty
24-Month Warranty: This original genuine repair kit is supplied with a 24-month warranty under normal operating conditions.
Warranty Coverage Includes:
- Manufacturing defects of the supplied repair kit components
- Material defects under normal use
- Functional defects of the original repair set itself
Warranty Exclusions:
- Incorrect installation or assembly
- Incorrect diagnosis of the transmission fault
- Damage caused by contaminated oil or unrelated gearbox problems
- Physical damage or misuse
Questions or Need Help?
Our technical team is ready to assist with compatibility checks, installation guidance and product selection.
Contact
Important Purchase Information
- Please verify this repair kit fits your specific mechatronics version before placing an order
- This is an original genuine repair kit for DQ200 mechatronics
- Professional installation is recommended
- Photos are for illustrative purposes only
- Worldwide shipping is available
- If your country is not listed at checkout, contact us and the order can be processed manually
- Please check carefully whether this product matches your gearbox version before ordering
