Temic
0AM927769D TCU DSG7 DQ200 Used
0AM927769D TCU DSG7 DQ200 Used
Couldn't load pickup availability
- Warranty
- Online Support
- Express Shipping
0AM927769D TCU DSG 7 DQ200 Used
Original used transmission control unit for DSG 7-speed DQ200 mechatronics systems in selected VW Group vehicles
OEM Part Numbers
0AM927769D
0AM325025D • 0AM325065AB
0AM325025M • 0AM325025K
Technical Specifications
Product Description
This original used 0AM927769D unit is an electronic transmission control module for the DSG 7-speed DQ200 mechatronics assembly. The control unit processes transmission data, controls gearshift strategy, communicates with the hydraulic mechatronics system and helps manage clutch and gear engagement functions.
What This TCU Does
- Controls electronic functions of the DQ200 mechatronics system
- Processes sensor inputs related to gearbox operation
- Supports shift management and transmission response
- Works together with the hydraulic mechatronics section for clutch and gear control
- Serves as a replacement for damaged or non-communicating original TCU units
Vehicle Compatibility
This control unit is used in selected Volkswagen Group vehicles equipped with 7-speed DSG DQ200 transmission and dry clutch system. Always verify both the exact OEM number and transmission type before purchase.
Suitable for Selected Models Such As
- Audi A1 / S1 (2010 - 2014)
- Audi A3 (2008 - 2014)
- Audi Q3 (2011 - 2014)
- VW Golf (2008 - 2013)
- VW Beetle (2008 - 2013)
- VW Jetta (2008 - 2013)
- VW Caddy (2008 - 2014)
- VW Passat (2008 - 2014)
- VW Passat CC (2008 - 2014)
- VW Polo (2008 - 2014)
- VW Touran (2008 - 2014)
- Škoda Fabia (2008 - 2014)
- Škoda Octavia (2008 - 2013)
- Škoda Rapid (2012 - 2014)
- Škoda Yeti (2008 - 2014)
- Škoda Superb (2008 - 2014)
- SEAT Altea XL (2008 - 2013)
- SEAT Ibiza (2008 - 2014)
- SEAT Leon (2008 - 2013)
- SEAT Toledo (2008 - 2013)
Common Fault Codes & Symptoms
A failing DQ200 mechatronics control unit can cause shifting problems, loss of drive, warning messages or transmission emergency operation. Common diagnostic trouble codes and related complaints may include:
-
P17BFFault related to pressure control or internal mechatronics issues -
P1895Pressure sensor / control-related malfunction -
P0841Transmission fluid pressure sensor range / performance issue -
P1727Clutch slipping or transmission operating fault -
P2711Unexpected mechanical gear disengagement or shift monitoring problem -
P178BVehicle remains stationary / transmission does not engage properly -
P174DGear actuator or mechatronics control-related issue -
P0562Supply voltage too low -
P0928Gear actuator circuit range / performance fault -
P073AGear engagement problem - Vehicle will not move or only selects certain gears
- Engine may not start because transmission status is not recognized correctly
- Gearbox warning light or transmission fault message on dashboard
- Loss of odd or even gear operation
- Jerking, delayed engagement or limp mode operation
Installation & Service Notes
Recommended Steps
- Check the exact OEM number on the original control unit
- Confirm that the gearbox is a DSG 7 DQ200 version
- Inspect the mechatronics assembly for related hydraulic or electrical damage
- Clone the original unit or load the correct software where required
- Install the module carefully using professional workshop procedures
- Perform diagnostic checks, fault code clearing and adaptation after installation
- Verify gearbox operation during test drive after repair
Why TCU Replacement Matters
1. Restores Communication
A healthy control unit is essential for communication between the gearbox mechatronics, sensors and vehicle systems.
2. Supports Correct Shifting
The TCU manages transmission logic and helps maintain proper gear selection and clutch operation.
3. Prevents Repeat Faults
When a defective module is correctly replaced and programmed, recurring control-related transmission faults can be eliminated.
4. Improves Reliability
A tested replacement unit helps restore dependable DSG operation when the original electronics have failed.
Quality Assurance & Warranty
12-Month Warranty: This used original transmission control unit is tested before dispatch and supplied with a 12-month functionality warranty under normal operating conditions. Final operation always depends on correct installation, matching software and overall gearbox condition.
Quality Control Includes:
- Verification that the unit is an original OEM-type component
- Functional testing before shipping
- Visual inspection of connector and housing condition
- Basic identification and part number check
Warranty Coverage Includes:
- Functional defects of the supplied control unit itself
- Manufacturing-related internal electronic defects
- Verified non-functionality of the delivered module under normal intended use
Warranty Exclusions:
- Damage caused by incorrect installation
- Software mismatch, failed programming or cloning errors
- Hydraulic or mechanical gearbox faults unrelated to the TCU
- Electrical damage caused by wiring or voltage problems in the vehicle
- Physical damage, water ingress or tampering
Questions or Need Help?
We can help verify part number compatibility and advise whether this 0AM927769D control unit is suitable for your gearbox.
ContactImportant Purchase Information
- Please compare the OEM number on your original unit before purchase
- This is a used electronic transmission control unit
- Programming, cloning or adaptation may be required
- Professional installation is recommended
- Photos are for illustrative purposes only
- Worldwide shipping is available
- If your country is not listed at checkout, contact us for manual order processing
- Please check carefully whether this product matches your vehicle and gearbox version before ordering