Transmission Type
DSG 7-Speed DQ200 (0AM)
Condition
Used Fully Functional
Manufacturer
TEMIC
Origin
Made in Romania
Component
Complete Mechatronics Unit
Warranty
12 Months
Tested & Verified Working Unit
This used original complete DQ200 mechatronic unit is fully tested and prepared as a reliable OEM replacement. The assembly includes the TCU/ECU and hydraulic block and is supplied with a 12-month warranty.
OEM Part Numbers
Main OEM Part Number:
0AM927769K • 0AM 927 769 K
Related Mechatronic / TCU Codes:
0AM927769D • 0AM927769E • 0AM927769F • 0AM927769G • 0AM927769K
Related Hydraulic Block Codes:
0AM325025D • 0AM325025H • 0AM325025J • 0AM325025DX
Related Valve Body Codes:
0AM325066 • 0AM325066AC • 0AM325066AE • 0AM325066R
Always Verify Your Part Number
Before placing an order, check the OEM number printed directly on your existing mechatronic unit and confirm it matches 0AM927769K. Related DQ200 mechatronic, hydraulic block and valve body codes may exist, but software version, hardware type, MQB / non-MQB platform and sensor configuration must be verified before replacement.
Technical Specifications
Transmission Type:
DSG 7-Speed DQ200 (0AM)
Component:
Complete Mechatronic Unit (TCU / ECU + Hydraulic Block)
Application:
Volkswagen Group vehicles equipped with DQ200 / 0AM transmission
Country of Manufacture:
Romania
Hydraulic Block Family:
0AM325025D / 0AM325025H / 0AM325025J / 0AM325025DX
Valve Body Family:
0AM325066 / 0AM325066AC / 0AM325066AE / 0AM325066R
Part Condition:
Used Tested & Verified Working
Warranty Period:
12 Months
Product Description
This is a genuine used OEM complete DQ200 mechatronic unit with part number 0AM927769K. It is a critical electro-hydraulic transmission component used in the 7-speed DSG DQ200 gearbox, responsible for hydraulic pressure regulation, clutch and gear actuation, and communication with the vehicle electronics.
What This Mechatronic Unit Does
- Controls hydraulic pressure inside the DSG gearbox
- Manages gear engagement and clutch operation
- Integrates the TCU / ECU with the hydraulic block and valve body
- Communicates with engine and transmission control systems
- Supports proper shifting performance and gearbox functionality
Complete Assembly
This listing is for a complete mechatronic unit including the electronic TCU/ECU, hydraulic block and valve body. Related code families may appear on labels under TCU number 0AM927769K, hydraulic block references 0AM325025... and valve body references 0AM325066....
Vehicle Compatibility
The 0AM927769K mechatronic is intended for selected Volkswagen Group vehicles equipped with DSG DQ200 / 0AM transmission. Always verify the exact part number on your existing unit before ordering.
Typical Applications
- Audi A1, A3, Q3 with DSG DQ200 / 0AM transmission
- Volkswagen Polo, Golf, Golf Plus, Jetta, Passat, Touran, Tiguan, Beetle, Bora, Scirocco, Sharan, Caddy with DSG DQ200 / 0AM transmission
- Škoda Fabia, Rapid, Roomster, Octavia, Superb, Yeti with DSG DQ200 / 0AM transmission
- SEAT Ibiza, Leon, Altea, Toledo with DSG DQ200 / 0AM transmission
- Only for vehicles where the original mechatronic part number matches 0AM927769K or verified related hydraulic / valve body references
Compatibility Warning
DQ200 mechatronics exist in different hardware and software versions. Some codes belong to the same mechatronic family, but they are not automatically plug-and-play interchangeable. Always verify by VIN, gearbox code, original label, software index and sensor configuration before purchase.
Common Fault Codes & Symptoms
A defective DQ200 mechatronic commonly causes the following issues:
-
P189C / 06300 Function restriction due to insufficient pressure build-up
-
P17BF / 06079 Pump protection maximum limit reached
-
P0562 / 16946 System voltage low
-
P1604 / 005636 Internal control module fault
-
P0841 Clutch pressure sensor A circuit range / performance
-
P1731 Hydraulic unit / valve body malfunction
-
P1746 Clutch temperature monitoring fault
-
P1747 Clutch pressure adaptation limit reached
-
P2716 Pressure control solenoid circuit / open
-
P072C Gear stuck / unable to select specific gear
-
PRNDS flashing Gearbox warning with limp mode
-
No reverse / No drive Common symptom of mechatronic or pressure failure
Diagnostic Tip
Before replacing the mechatronic, it is recommended to perform a proper diagnostic scan and verify gearbox condition, connector condition, hydraulic pressure faults, pump operation and adaptation status.
Installation
Installation Steps
- Verify the exact OEM part number on the original mechatronic unit
- Disconnect the battery and safely access the transmission mechatronic assembly
- Remove the old unit carefully and inspect the connector pins and gearbox area
- Install the replacement mechatronic and reconnect all plugs securely
- Clear stored fault codes using suitable diagnostic equipment
- Perform coding / adaptation if required by the vehicle
- Carry out a test drive and confirm correct gearbox operation
Professional Installation Recommended
Mechatronics must be professionally installed in the car, including calibration and adaptation. Please make sure that your service center can perform these procedures correctly.
Why DQ200 Mechatronics Fail
1. Internal Electronic Failure
Wear of internal electronic components can lead to communication problems, control faults and unstable gearbox operation.
2. Hydraulic Pressure Problems
Faults inside the hydraulic block, accumulator or valve body can cause improper pressure regulation, harsh shifts, pump overrun or limp mode.
3. Heat & Vibration Stress
Continuous operating temperature and vibration can gradually affect internal solder joints and sensitive electronic components.
4. Incorrect Adaptation or Installation Issues
Improper installation, missing calibration or adaptation, and connector-related faults may result in poor shifting behaviour after replacement.
Quality Assurance & Warranty
12-Month Warranty: This used complete mechatronic unit has been tested for correct operation and is supplied with a 12-month warranty under normal operating conditions.
Warranty Coverage Includes:
- Internal mechatronic malfunction
- Electronic control failure caused by the unit itself
- Hydraulic control faults caused by the unit itself
Warranty Exclusions:
- Incorrect installation or incompatible vehicle fitment
- External wiring or gearbox mechanical faults
- Physical damage after installation or mishandling
Questions or Need Help?
Our technical team is ready to assist with compatibility checks, installation guidance and technical support.
Contact
Important Purchase Information
- Please verify this part fits your specific vehicle before placing an order
- Images are for illustrative purposes only
- Worldwide shipping is available
- If your country is not listed at checkout, contact us and the order can be processed manually
- Professional installation and adaptation are strongly recommended
- The unit includes TCU/ECU and hydraulic block
- Always verify VIN, gearbox code and original mechatronic label before ordering
