Skip to product information
1 of 7

Volkswagen

0DD927770E DQ400 Mechatronic control unit New

0DD927770E DQ400 Mechatronic control unit New

Regular price €640,00 EUR
Price excl. VAT
Regular price Sale price €640,00 EUR
Sale Sold out
Quantity
  • Warranty
  • Online Support
  • Express Shipping

0DD927770E DQ400e Mechatronic | New, Original

Part Number: 0DD927770E
Gearbox: DQ400 / DQ400e

Brand new, original mechatronic control unit for the 6-speed DSG DQ400e triple-clutch (K0+K1+K2) transmission used in Volkswagen Group plug-in hybrid vehicles. Manufactured by Volkswagen. 24-month warranty.

Transmission Type DSG 6 DQ400 / DQ400e (Wet Triple-Clutch, Hybrid)
Component Complete New Mechatronic Control Unit
Condition Brand New, Original
Manufacturer Volkswagen
OEM Number 0DD927770E
Warranty 24 Months
New DQ400e Mechatronic Unit This 0DD927770E mechatronic unit is a brand new, original control module for the 6-speed DSG DQ400 / DQ400e transmission used in Volkswagen Group plug-in hybrid vehicles. It is manufactured by Volkswagen and supplied complete, ready for installation as a full mechatronics replacement.

OEM Part Numbers

Main OEM Number:

0DD927770E

Compatible / Interchangeable Numbers (after reprogramming):

0DD927770A • 0DD927770B • 0DD927770C • 0DD927770D • 0DD927770F

Supplier Reference Numbers (Continental-coded, visible on housing):

A2C76683600 • A2C77222203 • A2C75806205 • A2C75091800

Always Verify the Exact Part Number Before ordering, compare the OEM number on your original mechatronic unit and confirm it matches 0DD927770E or one of the compatible numbers listed above (A, B, C, D, F — these share hardware and become interchangeable after reprogramming). If unsure, send us your part number or VIN for verification before ordering.

Technical Specifications

Transmission Type:
6-Speed DSG DQ400 / DQ400e
Component Type:
Complete New Mechatronic Control Unit
OEM Number:
0DD927770E
Compatible Numbers:
0DD927770A / B / C / D / F
Manufacturer:
Volkswagen
Country of Manufacture:
China
Condition:
Brand New, Original — not refurbished
Clutch System:
Triple wet clutch — K1, K2 (DSG) + K0 (engine disconnect clutch)
Torque Range:
Up to 400 Nm, for transverse engines up to 1.4 L (PHEV applications)
Drivetrain Function:
Manages combustion engine, electric motor and K0 engine-disconnect clutch for hybrid operation
Installation Note:
Requires coding/programming to the vehicle, basic settings and clutch adaptation with a diagnostic tool
Warranty Period:
24 Months

Product Description

This brand new 0DD927770E mechatronic unit is manufactured by Volkswagen for the 6-speed DSG DQ400 / DQ400e transmission used specifically in Volkswagen Group plug-in hybrid (PHEV) vehicles. Unlike the standard DQ200/DQ250 mechatronics, the DQ400e control unit manages an additional K0 clutch which connects and disconnects the combustion engine from the hybrid drivetrain, allowing the car to run on electric power, combustion power, or both.

What This Mechatronic Unit Does

  • Controls hydraulic and electronic functions of the DQ400e hybrid gearbox
  • Manages engagement of the K1/K2 wet clutches and gear selection
  • Controls the K0 engine-disconnect clutch, enabling electric-only, combustion, or combined drive
  • Processes sensor data and coordinates with the hybrid control system
  • Serves as a direct, original replacement for a faulty or non-communicating unit
Important Product Note This is a brand new, original
unit manufactured by Volkswagen — not refurbished or repaired. As a new control module it will require coding to the vehicle plus basic settings and clutch adaptation with a suitable diagnostic tool after installation. It is covered by a 24-month warranty.

Vehicle Compatibility

The DQ400 / DQ400e mechatronic is used only in plug-in hybrid (PHEV) versions of selected Volkswagen Group models — non-hybrid versions of the same models use a different gearbox (e.g. DQ200 or DQ250) and are not compatible with this part.

Suitable for Selected Plug-In Hybrid Models Such As

  • VW Golf GTE (Mk7 / Mk8)
  • VW Passat GTE (B8)
  • Audi A3 e-tron / A3 Sportback TFSI e
  • Škoda Octavia iV
  • Škoda Superb iV
  • SEAT Leon e-Hybrid
  • Cupra Formentor e-Hybrid
Compatibility Check Recommended Always confirm this is the plug-in hybrid (PHEV) version of your model and check the gearbox/part number on your original mechatronic unit before ordering. Non-hybrid variants of the same models are not compatible. If unsure, send us your VIN together with the part number for verification.

Common Fault Codes & Symptoms

A defective DQ400e mechatronic unit, and specifically faults related to the K0 engine-disconnect clutch, can cause the vehicle to run only on electric power, fail to start the combustion engine correctly, or show transmission/hybrid warning messages.

  • P1735 Clutch 1 Position Sensor — electrical fault (commanded vs. measured clutch position/pressure out of range)
  • P2884 Release Clutch (K0 Engine-Disconnect Clutch) Stuck in Open Position — often linked to solenoid N218
  • Limp mode Gearbox/hybrid system enters emergency operating mode
  • Vehicle drives only on electric power, combustion engine will not engage
  • Transmission or hybrid system warning message on dashboard
  • Judder, harsh or delayed engagement when pulling away or when the engine engages
  • Fault clears temporarily but returns when switching between electric and combustion drive
Diagnostic Note These fault codes do not always prove the mechatronic unit itself is defective — wiring, connectors, fluid condition and the K0 solenoid (N218) should also be checked. Proper diagnosis before replacement is strongly recommended.

Installation & Service Notes

Recommended Steps

  • Check the exact OEM number on the original mechatronic unit
  • Confirm the vehicle is a plug-in hybrid (PHEV) model with the DQ400 / DQ400e gearbox
  • Inspect surrounding clutch, solenoid and gearbox components before installation
  • Install the replacement unit carefully using professional workshop procedures
  • Code/program the new unit to the vehicle and carry out basic settings and clutch adaptation
  • Perform a fluid check and top-up as needed for the DSG system
  • Perform full diagnostic checks and test hybrid gearbox operation after installation
Important Installation Note This is a hydraulic, electronic and hybrid-drive transmission component. Incorrect installation, missing coding, or incompatible configuration can prevent the gearbox and hybrid system from operating correctly. Installation and coding by a DSG/hybrid specialist is strongly recommended.

Why a New Mechatronic Matters

1. Full Hybrid Drivetrain Control

The DQ400e mechatronic manages not only gear shifting but also the K0 clutch that connects and disconnects the combustion engine — essential for correct hybrid operation.

2. Original Volkswagen Hardware

Manufactured by Volkswagen as original equipment, giving reliable build quality and long-term durability matching factory specification.

3. Resolves Engine-Disconnect Faults

A new unit addresses common K0 clutch and solenoid-related faults that can leave the vehicle running on electric power only.

4. Brand New, Not Refurbished

Supplied as a genuinely new unit rather than a repaired or refurbished core, backed by a 24-month warranty.

Quality Assurance & Warranty

24-Month Warranty: This brand new DQ400e mechatronic unit is supplied with a 24-month functionality warranty under normal operating conditions.

Warranty Coverage Includes:

  • Functional defects of the supplied mechatronic unit
  • Material or electronic defects under normal use
  • Faults present at the time of delivery that are not caused by installation

Warranty Exclusions:

  • Incorrect installation or missing/incorrect coding
  • Improper programming, adaptation or basic settings
  • Damage caused by wiring, clutch, solenoid or gearbox-related faults unrelated to the mechatronic unit
  • Physical damage or misuse

Questions or Need Help?

We can help verify compatibility and advise whether this 0DD927770E mechatronic unit is suitable for your gearbox.

Contact

Important Purchase Information

  • Compatible with 0DD927770E, 0DD927770A, 0DD927770B, 0DD927770C, 0DD927770D and 0DD927770F (after reprogramming)
  • This is a brand new, original unit manufactured by Volkswagen — not refurbished
  • For plug-in hybrid (PHEV) models only — not compatible with non-hybrid versions of the same vehicles
  • Coding to the vehicle, basic settings and clutch adaptation are required after installation
  • Professional installation and coding is recommended
  • Photos are for illustrative purposes only
  • Worldwide shipping is available
  • If your country is not listed at checkout, contact us for manual order processing
  • Please check carefully whether this product matches your vehicle and gearbox version before ordering
View full details