Transmission Type DSG 7 DQ200
Component Complete Mechatronic Unit
TCU Number 0AM927769E
Mechatronic Number 0AM325025E
Condition New LuK
Warranty 12 Months
Software Prepared for Your Vehicle This new LuK DQ200 mechatronic unit with 0AM927769E control unit is supplied as a replacement solution for selected 7-speed DSG transmissions. It is intended for professional gearbox repair and can be delivered with software prepared for your car.
OEM Part Numbers
Main OEM Numbers:
0AM325025E • 0AM927769E
Always Verify OEM Number and Gearbox Version Before ordering, compare the OEM numbers on your original mechatronic and control unit. DQ200 units can differ by hardware version, software configuration and vehicle application, so exact matching remains essential.
Technical Specifications
Transmission Type:
7-Speed DSG DQ200
Component Type:
Complete Mechatronic Unit with TCU
Mechatronic OEM:
0AM325025E
Transmission Family:
0AM / 0CW DQ200
Clutch Type:
Dry Clutch DSG System
Vehicle Group:
Volkswagen / Audi / Škoda / SEAT
Warranty Period:
12 Months
Product Description
This 0AM325025E mechatronic unit with 0AM927769E control unit is designed for selected DQ200 7-speed DSG transmissions used in Volkswagen Group vehicles. The mechatronic assembly combines hydraulic control and electronic transmission management to operate gear selection, clutch engagement and overall shift strategy.
What This Mechatronic Unit Does
- Controls hydraulic and electronic functions of the DQ200 transmission
- Manages clutch operation and gear engagement logic
- Processes transmission sensor signals and operating data
- Supports correct shifting performance and drivability
- Serves as a replacement for damaged or malfunctioning original mechatronic units
Programming Information This unit is offered with software for your car. Even so, professional installation and final diagnostic verification are recommended to ensure correct operation after installation.
Vehicle Compatibility
This mechatronic unit is intended for selected Volkswagen Group vehicles equipped with 7-speed DSG DQ200 transmission. The list below is presented in a cleaner workshop-style format, but the exact OEM number and gearbox version should always be confirmed before purchase. [web:111][web:103]
Volkswagen
- Beetle
- Caddy
- Golf
- Jetta
- Passat
- Polo
- Touran
Škoda
- Fabia
- Octavia
- Rapid
- Superb
- Yeti
Compatibility Check Recommended DQ200 mechatronic units may vary according to hardware generation, software version and gearbox configuration. Send us your VIN number and original OEM numbers for verification before ordering.
Common Fault Codes & Symptoms
Failures in the DQ200 mechatronic system can cause pressure-related faults, restricted gearbox operation or complete loss of drivability. Typical workshop findings and customer-reported symptoms may include the following: [web:107][web:109][web:112]
-
P17BF Hydraulic pump system overload protection or pressure regulation fault
-
06079 Hydraulic pump play protection fault
-
06300 Function restriction caused by insufficient pressure build-up
-
06293 Function restriction caused by pressure drop in the mechatronic system
-
PRNDS flashing Transmission warning indication on the dashboard
-
No drive / limp mode Vehicle may engage only limited gears or fail to move correctly
-
Harsh or incorrect shifting Rough gear changes, shock during engagement or irregular clutch behaviour
-
Judder when moving off Shaking in 1st gear or during upshifts under light load
-
No communication Electronic control unit fault or TCU communication problem
Diagnostic Note Similar symptoms may also be caused by clutch wear, wiring faults, poor voltage supply or internal gearbox damage. A correct diagnostic process should always confirm that the mechatronic unit is the real cause before replacement.
Installation & Service Notes
Recommended Steps
- Verify mechatronic and TCU OEM numbers on the original unit
- Confirm gearbox type as DSG 7 DQ200
- Inspect gearbox for clutch, wiring or hydraulic-related faults
- Install the replacement unit using correct workshop procedures
- Carry out coding, adaptation and final diagnostic checks if required
- Verify gearbox operation during test drive after installation
Important Installation Note This is a transmission control and hydraulic assembly for DSG gearboxes. Improper installation, incorrect adaptation or mismatch of gearbox specification may prevent correct transmission operation. Installation by a DSG specialist is strongly recommended.
Why Mechatronic Replacement Matters
1. Restores Gearbox Control
The mechatronic unit is the central operating element of the DQ200 gearbox and controls essential transmission functions.
2. Supports Smooth Shifting
Correct mechatronic operation helps maintain stable gear changes and better driving comfort.
3. Resolves Control-Related DSG Faults
Replacing a faulty unit can resolve many electronic-hydraulic gearbox issues when the rest of the transmission is mechanically sound.
4. Improves Long-Term Reliability
A correctly matched and professionally installed replacement mechatronic helps restore dependable DSG performance.
Quality Assurance & Warranty
12-Month Warranty: This new LuK mechatronic unit is supplied with a 12-month warranty. The product is intended for professional installation and correct gearbox application. [web:111][web:108]
Warranty Coverage Includes:
- Manufacturing defects of the supplied mechatronic unit
- Functional defects of the supplied control and hydraulic assembly
- Material defects under normal intended operating conditions
Warranty Exclusions:
- Incorrect installation or incorrect gearbox matching
- Damage caused by wiring faults, voltage issues or software misuse
- Mechanical gearbox problems unrelated to the supplied unit
- Damage caused by contamination, misuse or unauthorized repair attempts
Questions or Need Help?
We can help verify compatibility of 0AM325025E / 0AM927769E for your vehicle and gearbox before purchase.
Contact
Important Purchase Information
- Please verify the exact OEM numbers before ordering
- This product is intended for DSG 7-speed DQ200 gearbox applications
- Software is prepared for your car
- Professional installation is recommended
- Photos are for illustrative purposes only
- Worldwide shipping is available
- If your country is not listed at checkout, contact us for manual order processing
- Please check carefully whether this unit matches your vehicle and transmission version before purchase
